Chapter 5
Setup and Configuration
RUGGEDCOM WIN
User Guide
54
Deleting Scanner Configurations
Parameter
Description
Step [kHz]
Displays the scanning increment in the scanning range, in
kilohertz.
End frequency [kHz]
Displays the end of the scanning range as a frequency in kilohertz.
PUSC Mode
Synopsis:
{PUSC3, PUSC2, PUSC1, All Subchannels}
Displays the PUSC mode. The base station must be set to a PUSC
mode (using the Frame Settings screen in the Base Station)
for this feature to work. Select which PUSC mode channels the
scanner will connect to.
6. If required, repeat
and
until all entries are added.
7. Click
Apply
.
8. Click
Connect
to begin scanning for base stations.
Section 5.2.2
Deleting Scanner Configurations
To delete scanner configurations, do the following:
NOTE
For more information about the scanner, refer to
Section 5.2.1, “Configuring the Scanner”
1. Navigate to
WiMAX
. The
Scanner Settings
screen appears.
