Siemens RUGGEDCOM WIN5151 User Manual Download Page 84

Page: 84 / 108

Chapter 5

Setup and Configuration

RUGGEDCOM WIN

User Guide

Viewing a List of Traps

Figure 67: SNMP General Settings

Add

Delete

2. To remove an SNMP trap destination, select a row and click

Delete

. If no rows are selected, clicking

Delete

removes the last entry in the table.

3. Click

Apply

Section 5.12.2.3

Viewing a List of Traps

To view a full list of traps, refer to the WIMAX-SS-TRAPS.mib file in the software release folder. The following is a

list of common SNMP traps.

Event Name

Description

RestartOK

The subscriber station restarted successfully.

RestartFailure

The subscriber station failed to restart. This

event reports all causes of initialization errors.

WebLoginOK

Web interface login was successful.

WebLogout

Web interface logout.

WebLoginFailed

Web login has failed for 10 consecutive attempts.

EthernetUp

Ethernet link is up.

EthernetDown

Ethernet link is down.

FileOperationsOK

File operations are successful.

FileOperationsFail

File operations failed.

ConfigChanged

Configuration was changed successfully.

Summary of Contents for RUGGEDCOM WIN5151













































































































Search results

Summary of Contents for RUGGEDCOM WIN5151

Reviews:

Related manuals for RUGGEDCOM WIN5151

Brands by name

Popular brands

Siemens RUGGEDCOM WIN5151, User Manual

Search results

Summary of Contents for RUGGEDCOM WIN5151

Reviews:

Related manuals for RUGGEDCOM WIN5151

Brands by name

Popular brands