RUGGEDCOM WIN
User Guide
Chapter 5
Setup and Configuration
Connecting to the Base Station
55
1
2
Figure 47: Scanner Settings Screen
1.
Add
2.
Delete
2. Select a row and click
Delete
to remove a row from the table.
Or
Click
Delete All
to delete all scanning configuration information.
3. Click
Apply
.
Section 5.2.3
Connecting to the Base Station
To connect to base stations, do the following:
1. If this is the first time connecting to a base station, you must configure the scanner first. For more
information, refer to
Section 5.2.1, “Configuring the Scanner”
.
2. Navigate to
Management » System Functions
. The
System Functions
screen appears.
