RUGGEDCOM WIN5137
Installation Guide
Chapter 5
Certification
Standards Compliance
29
Certification
The RUGGEDCOM WIN5137 ODU CPE has been thoroughly tested to guarantee its conformance with
recognized standards and has received approval from recognized regulatory agencies.
•
Section 5.1, “Standards Compliance”
•
Section 5.2, “Agency Approvals”
•
Section 5.3, “MIL-STD Ratings”
•
Section 5.4, “IEEE 802.16e Mobile WiMAX Compliance”
•
Section 5.5, “Environmental Type Tests”
Section 5.1
Standards Compliance
The RUGGEDCOM WIN5137 complies with the following standards:
•
FCC Compliance
This equipment has been tested and found to comply with the limits for a Class A digital device pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications. Operation
of this equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference on his own expense.
•
Industry Canada Compliance
CAN ICES-3 (A) / NMB-3 (A)
•
Other
EN 50155 (Railway)
Section 5.2
Agency Approvals
The RUGGEDCOM WIN5137 has received approval from various agencies.
Agency
Standards
Comments
CSA
CSA C22
Approved
CE
EN 60950-1
Approved
TUV
UL 60950-1
Approved
FCC
FCC Part 15 (Subpart B, Class B)
Approved
FCC
Part 27
Approved
