Siemens RUGGEDCOM RS910W Installation Manual Download Page 12 | Manualshive

Page: 12 / 52

background image

Chapter 1

Introduction

RUGGEDCOM RS910W

Installation Guide

2

Feature Highlights

Section 1.1

Feature Highlights

Serial Device Server

• 2 x fully compliant EIA/TIA RS485/RS422/RS232 serial ports (software selectable)
• Baud rates up to 230 kbps
• 2 x RS485/RS422/RS232 Serial Ports (DB9 or RJ45)
• [Optional] Built-in RS485 termination

Ethernet Ports

• 2 x 10/100Base-TX copper or 10/100Base-FX fiber optic Ethernet ports
• [Optional] Up to 2 x additional 10/100Base-TX copper or 10/100Base-FX fiber optic Ethernet ports
• Industry standard fiber optical connectors: LC, SC, ST, MTRJ

Rated for Reliability in Harsh Environments

• Immunity to EMI and heavy electrical surges
• Hazardous Location Certification: Class I Division 2
• -40 to 85 °C (-40 to 185 °F) ambient operating temperature (no fans)
• 20 AWG Galvanized Steel
• DIN or panel mounting options provide secure mechanical reliability
• [Optional] Conformal coated printed circuit boards

Universal Power Supply Options

• Fully integrated power supply
• Universal high-voltage range:

▫ 125-250 VDC or 100-240 VAC (Hazardous Environments)
▫ 88-300 VDC or 85-264 VAC (Non-Hazardous Environments)

• Terminal blocks for reliable maintenance free connections
• CSA/UL 60950-1 safety approved to 85 °C (185 °F)

Section 1.2

Description

The RUGGEDCOM RS910W features various ports, controls and indicator LEDs on the front panel for connecting,

configuring and troubleshooting the device.

«
...
10
11
12
13
14
...
»

Summary of Contents for RUGGEDCOM RS910W





















































Reviews:

No comments

Related manuals for RUGGEDCOM RS910W

Serial Servers Vlinx VESR9xx

Brand: B&B Electronics Pages: 61

Brand: Patton electronics Pages: 331

Brand: Watchguard Pages: 32

Brand: Sun Microsystems Pages: 4

Brand: B&B Electronics Pages: 2

Brand: IBM Pages: 24

Brand: PRG Pages: 50

Brand: Samsung Pages: 58

Brand: Allnet Pages: 118

Brand: USR IOT Pages: 48

Brand: Echostreams Pages: 3

ReadiManagerSE200

Brand: Polycom Pages: 4

9000 APPLIANCE SERIES

Brand: Arcserve Pages: 14

Brand: Planet Pages: 28

5325301507 - Snap Server 4400 NAS

Brand: Adaptec Pages: 250

Brand: B+B SmartWorx Pages: 2

Brand: Tektronix Pages: 1026

TIGPT1U - Carrier Grade Server

Brand: Intel Pages: 89

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands