RUGGEDCOM RS910W
Installation Guide
Chapter 6
Certification
TÜV SÜD
39
This device further complies with IC RSS-210 and is approved under the ID 4997A-VG5RW80G.
Section 6.1.5
TÜV SÜD
This device is certified by TÜV SÜD to meet the requirements of the following standards:
•
CAN/CSA-C22.2 NO. 60950-1
Information Technology Equipment – Safety – Part 1: General Requirements (Bi-National standard, with UL
60950-1)
•
UL 60950-1
Information Technology Equipment – Safety – Part 1: General Requirements
Section 6.1.6
RoHS
This device is declared by Siemens Canada Ltd to meet the requirements of the following RoHS (Restriction of
Hazardous Substances) directives for the restricted use of certain hazardous substances in electrical and electronic
equipment:
•
China RoHS 2
Administrative Measure on the Control of Pollution Caused by Electronic Information Products
A copy of the Material Declaration is available online at
https://support.industry.siemens.com/cs/ww/en/
Section 6.1.7
Other Approvals
This device meets the requirements of the following additional standards:
•
IEEE 1613
IEEE Standard Environmental and Testing Requirements for Communications Networking Devices in Electric
Power Substations
•
IEC 61000-6-2
Electromagnetic Compatibility (EMC) – Part 6-2: Generic Standards – Immunity for Industrial Environments
•
IEC 61850-3
Communication Networks and Systems in Substations – Part 3: General Requirements
Section 6.2
EMC and Environmental Type Tests
The RUGGEDCOM RS910W has passed the following Electromagnetic Compatibility (EMC) and environmental
tests.
