RUGGEDCOM RS900GP
Installation Guide
Chapter 4
Communication Ports
Copper Ethernet Ports
17
Communication Ports
The RUGGEDCOM RS900GP features eight standard 10/100Base-TX copper RJ45 Ethernet ports capable of Power-
over-Ethernet (PoE). It can also be equipped with two additional Gigabit Ethernet capable ports, for which many
fiber transceiver and copper options are available.
Each communication port type has a specific place in the RUGGEDCOM RS900GP chassis.
1
2
Figure 10: Port Assignment
1.
Copper Ethernet, SFP or Fiber Optic Ethernet Ports (Ports 9 and 10)
2.
Standard PoE Ports (Ports 1 to 8)
CONTENTS
•
Section 4.1, “Copper Ethernet Ports”
•
•
Section 4.3, “Fiber Optic Ethernet Ports”
•
Section 4.4, “SFP Transceivers”
Section 4.1
Copper Ethernet Ports
The RUGGEDCOM RS900GP supports an optional set of 10/100/1000Base-TX copper RJ45 or micro-D Ethernet
ports that allow connection to standard Category 5 (CAT-5) unshielded twisted-pair (UTP) cables with RJ45 male
connectors. Each port is directly connected to chassis ground on the device and can accept CAT-5 Unshielded
Twisted-Pair (UTP) or Shielded Twisted-Pair (STP) cables.
Summary of Contents for RUGGEDCOM RS900GP
