Siemens RUGGEDCOM RS900GP, Installation Manual

Page: 12 / 46

Chapter 1
Introduction
RUGGEDCOM RS900GP
Installation Guide
2 Description
Power Supply
• Single 54 VDC, 255 W (or greater) external power supply can deliver 30 W x 8 port per IEEE 802.3at
• Second power supply input for a redundant 54 V power supply
• Complies with IEEE 802.3af, 15 W x 8 output when using 48 VDC power supplies
Section 1.2
Description
The RUGGEDCOM RS900GP features various ports, controls and indicator LEDs on the front panel for connecting,
configuring and troubleshooting the device.
3
1
4
5
6
2
7
Figure 1: RUGGEDCOM RS900GP
1. Fiber Optic or SFP (Small Form-Factor Pluggable) Ethernet Ports 2. Copper PoE Ethernet Ports 3. POWER LED 4. RS-232 Console Port
(DB9) 5. ALARM LED 6. Failsafe Alarm Relay 7. Redundant Power Supply Terminal Blocks
Communication Ports Receive and transmit network traffic, as well as provide remote Web access to the
RUGGEDCOM ROS operating system. For more information, refer to:
•
Section 3.1, “Connecting to the Device”
• Chapter 4, Communication Ports
RS-232 Console Port The serial console port is for interfacing directly with the device and accessing initial
management functions. For information about connecting to the device via the serial
console port, refer to Section 3.1, “Connecting to the Device” .
POWER LED Illuminates when power is being supplied to the device.
Color Description
Green Device is receiving power
Off No power