Siemens RUGGEDCOM RS416PF, Installation Manual

Page: 14 / 56

Introduction
1.5.1 Supported Fiber Optic Cables
1.5.1 Supported Fiber Optic Cables
The following fiber optic cable types are supported under the stated conditions.
Distance (m) Cable Type Wavelength (nm) Modal Bandwidth
(MHz·km)
100Base-FX 1000Base-SX 10GBase-SR
850 200 — 275 33 OM1 (62.5/125)
1300 500 2000 — —
850 500 — 550 82 OM2 (50/125)
1300 500 2000 — —
850 1500 — 550 300 OM3 (50/125)
a
1300 500 2000 — —
850 3500 — 550 400 OM4 (50/125)
a
1300 500 2000 — —
a
Laser optimized.
1.6 Precision Time Protocol (PTP) Support
The Precision Time Protocol (PTP) module adds the ability to provide time
synchronization via Ethernet using the Precision Time Protocol (PTP) and Network
Time Protocol (NTP), and to synchronize with an external IRIG-B source.
The PTP module features BNC ports for TTL IN and TTL OUT. It also includes an LED to
indicate when synchronization has been achieved.
Note
The PTP module can only be installed in slot 5. For more information, refer to
" Communication Ports (Page 25)" .
TT
L
IN
TT
L
OU
T
1 2
1
TTL OUT Port
2
TTL IN Port
Figure 1.2 PTP Module
For more information about the BNC ports, refer to "BNC Ports (Page 31)" .
RUGGEDCOM RS416PF
Installation Manual, 04/2021, C79000-G8976-1355-04
5