Introduction
1.2 Description
1
Serial Ports
2
Fiber Optic Ethernet and/or BNC (Optional) Ports
3
Port Status Indicator LEDs
4
Display Mode Indicator LEDs
5
Mode Button
6
Alarm Indicator LED
7
Power Module Indicator LEDs
8
RS-232 Serial Console Port (RJ45)
Figure 1.1
RUGGEDCOM RS416PF
Communication Ports
Ports for communicating with other devices or accessing the
RUGGEDCOM RUGGEDCOM RS416PF operating system are
described in
Port Status Indicator LEDs
Port status indicator LEDs indicate the operational status of each
port, dependent on the currently selected mode.
Description
Mode
Color/State
Ethernet Ports
Serial Ports
Green (Solid)
Link detected
—
Green
(Blinking)
Link activity
Traffic
detected
Status
Off
No link
detected
No traffic
Green (Solid)
Full duplex mode
Orange
(Blinking)
Half duplex mode
Duplex
Off
No link detected
Green (Solid)
100 Mb/s
>19200 to
<57600 bps
Green
(Blinking)
—
57600 bps or
higher
Orange (Solid) 10 Mb/s
<19200 bps
Speed
Off
No link detected
Display Mode Indicator LEDs
The display mode indicator LEDs indicate the current display mode
for the port status indicator LEDs (i.e. Status, Duplex or Speed).
Mode button
The
Mode
button sets the display mode for the port status indicator
LEDs (i.e. Status, Duplex or Speed). It can also be used to reset the
device if held for 5 seconds.
Alarm Indicator LED
The alarm indicator LED illuminates when an alarm condition exists.
Power Module Indicator LEDs
The power module indicator LEDs indicate the status of the power
modules.
Color
Description
Green
The power supply is supplying power
Red
Power supply failure
Off
No power supply is installed
RS-232 Console Port
The serial console port is for interfacing directly with the device
and accessing initial management functions. For information
RUGGEDCOM RS416PF
Installation Manual, 04/2021, C79000-G8976-1355-04
3
