Siemens RF30-EM, Configuration Manual

Page: 24 / 72

Stand-alone mode
24
Siemens AG
04.2010
11.2 Cancel a card
11.2.1 Cancel a card by reading it
NOTE
If you have entered the wrong Axx command (e g in step 3 below) you can abort the command and
exit to Administrator mode by pressing A again.
1. Press B .

2. Enter the 6-digit Administrator code. See section 8 Change Administrator
code.

3.
Press
A14
.
 The buzzer sounds a confirm tune.

4.
Present the card at the RF30-EM.
 The buzzer sounds a confirm tune.

5. Cancel the next card, by presenting them at the RF30-EM.
11.2.2 Cancel a card by entering its number
NOTE
If you have entered the wrong Axx command (e g in step 3 below) you can abort the command and
exit to Administrator mode by pressing A again.
1. Press B .

2. Enter the 6-digit Administrator code. See section 8 Change Administrator
code.

3. Press A16 .
 The buzzer sounds a confirm tune.

4. Enter the card number on the keypad.
 The buzzer sounds a confirm tune.

5. Cancel the next card, by entering the card number at the keypad.