System expansions
Installing the SE/DE converter boards
72
A26361-K412-Z107-3-7619
1
2
3
Ê
Remove the cover plates of the slots into which you want to insert the boards
(the bottom three can be used). Remove the accompanying mounting screws
(1) on the back of the server and take out the cover plate toward the inside
(2).
Ê
Remove the mounting screw for the RemoteView hard disk carrier (3).
1
1
3
2
4
Ê
Insert the preassembled assembly kit with the ends of the interface plates (1)
into the rear panel of the server and swivel it into its final position (2).
Ê
Screw the assembly kit and the RemoteView hard disk carrier tight using the
previously removed screw (3).
Ê
Screw the interface plates tight from the back of the server (4).