Connecting the server
Preparation for use and operation
A26361-K412-Z107-3-7619
15
Disconnecting cables
•
Turn off all power and equipment switches.
•
Pull all power plugs out of the grounded power outlets.
•
Unplug all data communication cables from the utility sockets.
•
Disconnect the relevant cables at the server and at the peripherals.
Connecting external devices
The ports for external devices are on the rear of the server. Which ports are
available on your server depend on the boards installed. The standard ports are
indicated by symbols.
4
6
5
3
1
2
7
C A N
1 = Monitor port
2 = CAN bus
3 = Parallel port
4 = Serial port 1
5 = Serial port 2
6 = Keyboard port
7 = PS/2 mouse port
i
Some of the devices that you connect require special drivers (see the
documentation for the connected device).
Ê
Connect the external devices to the appropriate port.
