A26361-K412-Z107-3-7619
37
Troubleshooting and tips
!
Take note of the safety hints in the manual "Safety and Ergonomics" and
in the chapter "
Preparation for use and operation
", when you connect or
disconnect cables.
If a fault occurs, try to correct it as described:
•
in this chapter
•
in the documentation of the connected devices
•
in the help systems of the software used.
If you fail to correct the problem, proceed as follows:
Ê
Switch the server off.
Ê
Make a note of the steps and the circumstances that led to the fault. Also
make a note of any error messages displayed.
Ê
Contact your customer service.
Power-on indicator remains dark after you have
switched on your device
This may have the following causes:
There is a defect in the ac power supply
Ê
Check whether the power cable is plugged properly into the server and power
outlet.
Ê
Switch your server on.
Power supply overloaded
Ê
Switch the server off.
Ê
Switch the server on after a few seconds.