A26361-K412-Z107-3-7619
5
Important notes
In this chapter you will find information regarding safety which it is essential to take
note of when working with your server. The manufacturer's notes contain helpful
information on your server.
Safety
!
Pay attention to the information provided in the manual "Safety and
Ergonomics".
•
During installation and before operating the device, observe the instructions
on environmental conditions in the chapter entitled "
" as well as
the instructions in the chapter "
Preparation for use and operation
•
The ON/OFF switch does not cut off line voltage from the server. To
disconnect the line voltage completely, remove the power plug from the
grounded power outlet.
•
When cleaning the Server, observe the relevant notes in the chapter
"
Preparation for use and operation
".
•
When connecting and disconnecting cables, observe the relevant notes in the
chapter "
Preparation for use and operation
•
Replace the lithium battery on the system board in accordance with the
instructions in the Technical Manual for the system board.
•
The CD-ROM drive contains a light-emitting diode (LED), classified according
to IEC 825-1:1993:LASER CLASS 1.
•
Keep this Operating Manual together with your device. If you pass on the
device to third parties, you should also pass on the Operating Manual.
•
Please check whether the device is set to the local line voltage (see "
and removing a power supply module
").
