Siemens POWERMOBIL SP Maintenance Instruction Download

Page: 36 / 44

Maintenance, Operating Value / Functional Inspection

POWERMOBIL

SPR2-240.831.01.02.02

Siemens AG

07.05

CS PS 24

Page 36 of 44

Medical Solutions

Maintenance, Operating Value / Functional Inspec-

tion

4.1

Maintenance

PMP

Cleaning the system

•

Clean the entire system:

- Visible cables

- Exterior surfaces

- Contact surface of wheels

- Interior space

PMP

System ventilation

•

Clean the ventilation slots of the POWERMOBIL and monitor cart.

PMP

POWERPHOS fan

•

Remove the cover of the POWERPHOS.

•

Check the visible fan for proper functioning.

•

Check the fan built into the C-arm for proper functioning. To do this, briefly block the vis-
ible fan mechanically. The fan built into the C-arm must run audibly.

PMP

Memoskop ventilation

•

Clean the ventilation slots of the Memoskop Fast.

•

Check that the fan is functioning properly.

4.1.1 DICOM

bridge

PMP

Ventilation

•

Clean the ventilation slots of the DICOM bridge.

•

Check that the fan is functioning properly.

4.1.2 Codonics

printer

PMP

Ventilation

•

Clean the ventilation slots of the printer and Framegrabber.

•

Check that the fan is functioning properly.

PMP

Cleaning

Summary of Contents for POWERMOBIL SP













































Search results

Summary of Contents for POWERMOBIL SP

Reviews:

Related manuals for POWERMOBIL SP

Brands by name

Popular brands

Siemens POWERMOBIL SP, Maintenance Instruction

Search results

Summary of Contents for POWERMOBIL SP

Reviews:

Related manuals for POWERMOBIL SP

Brands by name

Popular brands