Siemens OpenStage 60 G User Manual Download Page 297

Page: 297 / 297

Communications GmbH & Co. KG

Hofmannstr. 51

80200 München

Deutschland
Siemens Enterprise

Communications GmbH & Co. KG

is a Trademark Licensee of Siemens AG
Reference No:

A31003-S2030-U107-1-7619
The information provided in this document

contains merely general descriptions or char-

acteristics of performance which in case of

actual use do not always apply as described

or which may change as a result of further

development of the products.

An obligation to provide the respective char-

acteristics shall only exist if expressly agreed

in the terms of contract. Availability and

technical specifications are subject to

change without notice. OpenScape,

OpenStage and HiPath are registered trade-

marks of Siemens Enterprise

Communications GmbH & Co. KG.

All other company, brand, product and ser-

vice names are trademarks or registered

trademarks of their respective holders.

Siemens Enterprise Communications

www.siemens-enterprise.com

Summary of Contents for OpenStage 60 G










































































































































































































































































































Search results

Summary of Contents for OpenStage 60 G

Reviews:

Related manuals for OpenStage 60 G

Brands by name

Popular brands

Siemens OpenStage 60 G, User Manual

Search results

Summary of Contents for OpenStage 60 G

Reviews:

Related manuals for OpenStage 60 G

Brands by name

Popular brands