Siemens OpenStage 40 T User Manual Download Page 59

Page: 59 / 129

Enhanced phone functions

Step by Step

Adding a party

Any party in a system conference can extend the con-
ference by
•

calling a specific party and connecting them,

•

connecting a party from a consultation call to the
conference, or

•

accepting a second call and connecting the caller to
the conference.

Calling a specific party and connecting them

You intend calling another party and connecting them to
the conference.

Confirm the option shown.

Call the new party.
Inform this party that you are initiating a conference.
Confirm the option shown.
The party is connected to the conference.

If the new party does not answer

Select and confirm the option shown.

Extending a conference by adding a consultation
call

During the conference, you wish to hold a consultation
call.

Confirm the option shown.

Select and confirm the option shown.

Call a party. Hold the consultation call.

Select and confirm to connect the party from the con-
sultation call to the conference.

Toggle between the conference and the consultation
call.

Select and confirm to end the consultation call and re-
turn to the conference.

Conference

Add to conference?

Conference?

Return to conference?

Conference

Consultation?

Conference?

Toggle?

Release and return?

Summary of Contents for OpenStage 40 T


































































































































Search results

Summary of Contents for OpenStage 40 T

Reviews:

Siemens OpenStage 40 T, User Manual, Page: 59 / 129

Search results

Summary of Contents for OpenStage 40 T

Reviews: