Siemens OpenStage 40 T Page 104 User Manual Download

Page: 104 / 129

Step by Step

Making calls via multiple lines

104

Retrieving messages

If new messages that have not yet been retrieved are in
the mailbox and a programmable sensor key has been
assigned the function "Mailbox", the LED of this key
lights up.

Please refer to the information on

page 24.

Press the "MBLN" sensor key.

Information regarding the caller is displayed

page 24.

Responding to a callback request

A callback request is displayed.

Select and confirm the option shown. The party is
called on the relevant line.

Next entry

More than one entry is available.

Select and confirm the option shown. The next entry is
displayed.

Deleting mailbox entries

The relevant entry is displayed.

Select and confirm the option shown.

Ending message retrieval

Press the key shown.

Select and confirm the option shown.

Undeleted entries in the mailbox remain saved. If unan-
swered callback requests are present, the programmed
"MBLN" key remains lit.

Output?

Next entry?

Delete?

Cancel?

Summary of Contents for OpenStage 40 T


































































































































Search results

Summary of Contents for OpenStage 40 T

Reviews:

Related manuals for OpenStage 40 T

Brands by name

Popular brands

Siemens OpenStage 40 T, User Manual

Search results

Summary of Contents for OpenStage 40 T

Reviews:

Related manuals for OpenStage 40 T

Brands by name

Popular brands