manualshive.com logo in svg

Siemens OpenStage 40 T, User Manual, Page: 25 / 129

Share
Download
Siemens OpenStage 40 T User Manual Download Page 25

Getting to know your OpenStage phone

25

Call log

Calls to your phone and numbers dialed from your phone are recorded 
chronologically in the call log, sorted, and divided into the following lists:
•

Unanswered calls

•

Incoming calls

•

Outgoing calls

Your phone saves the last 10 unanswered calls, the last 6 outgoing calls, 
and the last 12 incoming calls in chronological order. Each call is assigned 
a time stamp. The most recent entry in the list that has not yet been re-
trieved is displayed first. In the case of calls from the same caller, only the 
time stamp is updated.

Every list that contains at least one entry is automatically offered 

Æ

page 21 in the idle menu 

Æ

page 50.

Information is displayed regarding the caller and the time at which the call 
was placed.

Example:

Callers with suppressed numbers cannot be saved in the call log.

For a description of how to edit the call logs 

Æ

page 50.

On a multi-line telephone, the call log is only saved for the primary 
line.

Next call?

10168

 

PETER

Busy

21.02.

16:25

Output?

Delete?
Return?

Call the displayed party

Show the next entry

Delete the entry

Back to the list overview

Telephone status, date, time

Caller ID

Summary of Contents for OpenStage 40 T


































































































































Reviews:

No comments