administration.fm
A31003-S2000-M102-3-76A9, 08/07/2009
Asterisk - OpenStage Family, Administration Manual
3-1
Administration
Access via Local Phone
3
Administration
This chapter describes the configuration of every parameter available on the OpenStage
phones. For access via the local phone menu, see the following; for access using the web in-
terface, please refer to Section 2.3.1, “Access the Web Interface (WBM)”.
3.1
Access via Local Phone
1.
Access the Administration Menu
OpenStage 60/80:
The
v
key toggles between the Settings menu, the Applications menu, and the applica-
tions currently running. Press the
v
key repeatedly until the "Settings" tab is active. (The
v
key toggles between the Settings menu, the Applications menu, and the applications
currently running.)
OpenStage 15/20/40:
Press the keys
D
,
l
, and
i
consecutively to select the administration menu.
2.
Enter Password
When the Admin menu is active, you will be prompted to enter the administrator password.
The default admin password is "123456". It is highly recommended to change the pass-
word (see Section 3.13, “Password”) after your first login.
For entering passwords with non-numeric characters, please consider the following:
By default, password entry is in numeric mode. For changing the mode, press the # key
once or repeatedly, depending on the desired character. The # key cycles around the input
modes as follows:
(Abc) -> (abc) -> (123) -> (ABC) -> back to start.
>
The data entered in input fields is parsed and controlled by the phone. Thus, data is
accepted only if it complies to the value range.
