Siemens OpenStage 15 Administration Manual Download Page 182

Page: 182 / 284

Administration

A31003-S2000-M102-3-76A9, 08/07/2009

3-150

Asterisk - OpenStage Family, Administration Manual

administration.fm

Diagnostics

•

Service registry

Keeps a record of all services currently running inside the phone.

•

SIP call control

Contains the call model for the phone and is associated with telephony and call handling.

•

SIP messages

Traces the SIP messages exchanged by the phone.

•

SIP signalling

Involved in the creation and parsing of SIP messages. This service communicates directly
with the SIP stack.

•

Sidecar service

Handles interactions between the phone and any attached sidecars.

•

Team Service

Primarily concerned with keyset operation.

•

Tone generation service

Handles the generation of the tones and ringers on the phone.

•

Transport service

Provides the IP (LAN) interface between the phone and the outside world.

•

USB backup service

Used to make backup/restore to/from USB stick by using password. This item is available
in the phone GUI.

•

vCard parser service

Handles parsing and identification of VCard information while sending or getting VCards
via Bluetooth.

•

Voice engine

Provides a switching mechanism for voice streams within the phone. This component is
also involved in QDC, Music on hold and voice instrumentation.

•

Voice mail

Handles the voice mail functionality.

•

Voice recognition

Used by the voice dial facility for recognizing spoken dialing commands.

•

Web Server service

Provides access to the phone via web browser.

•

802.1x service

Provides authentication to devices attached to a LAN port, establishing a point-to-point
connection or preventing access from that port if authentication fails. The service is used
for certain closed wireless access points.

After changing the level for the tracing of SIP messages, the phone must be reboo-
ted. Otherwise the changes would have no effect.

Summary of Contents for OpenStage 15





























































































































































































































































































Search results

Summary of Contents for OpenStage 15

Reviews:

Related manuals for OpenStage 15

Brands by name

Popular brands

Siemens OpenStage 15, Administration Manual

Search results

Summary of Contents for OpenStage 15

Reviews:

Related manuals for OpenStage 15

Brands by name

Popular brands