Siemens OOH740-A9-Ex Technical Manual Download

Page: 26 / 72

Structure and function
Function

26
Building Technologies

A6V10367521_h_en_--

Fire Safety

2015-02-02

3.2.5 Internal alarm indicator

The point detectors have a red LED that acts as an internal alarm indicator. The

internal alarm indicator shows the operating condition of the point detector

according to the tables below:

Addressed operation

Operating condition

Flashing mode of the AI

Alarm

AI flashes every second

Localization

AI flashes every second

Device test (with alarm)

AI flashes every second

Device test (without alarm) No flashing (AI off)

Collective operation

Operating condition

Flashing mode of the AI

Alarm

AI flashes every second

Device test (with alarm)

AI flashes every second

Device test (without alarm)

Flashes in relation to parameter set

3.2.6 Connection for external alarm indicators

An external alarm indicator FDAI9x-Ex can be connected to the point detector

OOH740-A9-Ex.
On the C-NET-Ex, it is possible to connect external alarm indicator to any point

detector. The trigger for activating the alarm indicator can be programmed at the

control panel.

3.2.7 Renovation mode

When operating point detectors on the C-NET-Ex, individual detectors can be set

specifically to renovation mode on the control panel.
Select renovation mode if major work is being carried out in the room and large

volumes of dust or aerosols are being produced.

NOTICE

Changed settings
Limited alarm function in renovation mode

●

In renovation mode, the multisensor fire detector only triggers an alarm when

the temperature exceeds 80 °C for 20 seconds.

Summary of Contents for OOH740-A9-Ex









































































Search results

Summary of Contents for OOH740-A9-Ex

Reviews:

Related manuals for OOH740-A9-Ex

Brands by name

Popular brands

Siemens OOH740-A9-Ex, Technical Manual

Search results

Summary of Contents for OOH740-A9-Ex

Reviews:

Related manuals for OOH740-A9-Ex

Brands by name

Popular brands