Siemens OOH740-A9-Ex Technical Manual Download

Page: 11 / 72

About this document

Applicable documents

Building Technologies

A6V10367521_h_en_--

Fire Safety

2015-02-02

1.1 Applicable documents

Document ID

Title

001204

Principles, applications, installation, maintenance Fire alarm signal in

areas at risk of explosion

001227

Installation instructions Shunt Zener Diode SB2, SB3

001519

Installation instructions Input / output module DC1192

007228

Data Sheet Test equipment and accessories FDUD291, FDUD292,

FDUD293, RE6, RE7T, RE8ST, RE8STCO, RE10, FDUM291,

FDUM292, FDUL221, Sinteso-Test, FDUD29x-E

008250

Technical Manual Line tester FDUL221

009122

Technical manual Input/output module (transponder) FDCIO223

A6V10208532

Installation Sealing element FDBZ295

A6V10208546

Installation Detector base FDB20x/FDB201-AA, FDB22x/FDB221-AA,

Base attachment FDB291, Detector designation plate FDBZ291,

Dummy detector FDX291

A6V10208552

Installation Detector locking device FDBZ293

A6V10210416

FS720 Fire detection system - Commissioning, Maintenance,

Troubleshooting

A6V10210424

FS720 Fire detection system - Configuration

A6V10260486

Installation Alarm indicators, adapter frame, surface-mounted housing,

indicator housing, incl. washer FDAI92EX, FDAI93EX, AI330,

DCA1191, DJZ1193

A6V10324618

Planning, Mounting/Installation, Commissioning, Maintenance of fire

detection installations with addressed detector lines in potentially

explosive atmospheres

A6V10331076

Installation Base attachment wet FDB295, Detector designation plate

DBZ1193A, Protective cage DBZ1194, EMC-protective cage FDBZ294

A6V10333771

Technical Manual Line adapter (Ex) FDCL221-Ex

A6V10367523

Installation Automatic fire detector OOH740-A9-Ex

A6V10371417

Data sheet Automatic fire detector OOH740-A9-Ex

A6V10414910

Technical manual Zone module, external powered FDCI723

A6V10443621

Modernizing fire detection installations with multiple protocol detectors

in potentially explosive atmospheres

Please also observe the documentation for your fire detection system.

1.2 Download center

You can download various types of documents, such as data sheets, installation

instructions, and license texts via the following Internet address:

http://siemens.com/bt/download

Enter the document ID in the 'Find by keyword' input box.

You will also find information about search variants and links to mobile

applications (apps) for various systems on the home page.

Summary of Contents for OOH740-A9-Ex









































































Search results

Summary of Contents for OOH740-A9-Ex

Reviews:

Related manuals for OOH740-A9-Ex

Brands by name

Popular brands

Siemens OOH740-A9-Ex, Technical Manual

Search results

Summary of Contents for OOH740-A9-Ex

Reviews:

Related manuals for OOH740-A9-Ex

Brands by name

Popular brands