Iso-center with ultrasound
6 - 15
Siemens AG
SPL1-130.840.02
Page 15 of 16
MODULARIS Uro Plus
Medical Solutions
Rev. 03
04.05
CS PS 24
•
Set all slide controls all the way to the left.
•
The image flip
key may not be selected.
•
Select the appropriate ultrasound probe:
•
Check whether the ultrasound arm is as shown in Fig. 22; if not, position it accordingly.
The long slot must be visible (1/Fig. 22).
Checking the distance: Height (23a/Fig. 23)
•
Press the
key.
•
Move the track ball until the corss "+1" is in the center of the isocenter crosshair.
•
The value displayed for "D1" (G/Fig. 23) must be between 33 and 36 mm; if not, move the
probe appropriately in the longitudinal axis.
•
Press the
key.
•
Move the cross "+2" using the track ball onto the longitudinal axis of the target line in the
isocenter (M/Fig. 23a).
•
Press the
key.
•
Move the cross "+2" using the track ball horizontally into the center of the white area
(23a/Fig. 23) of the isocenter phantom
•
The value displayed for "D2" (H/Fig. 23) must be between 1 and 5 mm. This is only valid
for the default values, see instructions, SPL1-130.038.01...
•
Press the
key.
Fig. 23
Sector probe
Array probe
A
B
C
D
E
2
Image detail sche-
matic
:
2
C
23a
23b
M
C
G
H
