Siemens LU13 series, Installation And Operating Instructions Manual

Page: 6 / 20

4
Removing and installing the metal filter:
1. Press in the interlocks on the left and
right sides of the filter grille. Fig. 1/1.
2. Remove the filter grille. Fig. 1/2.
3. Remove the wire grille and the saturated
metal filter. Fig. 2.
4. Clean the filter grille and the metal filter.
5. Re-insert the cleaned metal filter and
clamp them with the wire grille. Fig. 2.
6. Re-insert the filter grille. Fig. 1/2.
The interlocks must lock into position
on the left and right sides. Fig. 2/1.
Activated carbon filter:
For binding the odorous substances in
circulating-air mode.
Installing:
1. Press in the interlocks on the left and
right sides of the filter grille. Fig. 1/1.
2. Remove the filter grille. Fig. 1/2.
3. Insert the activated carbon filter from
below into the extractor-hood housing
and lock into position and turned clockwi-
se.(fig.3)
4. Re-insert the filter grille. Fig. 1/2.
The interlocks must lock into position
on the left and right sides. Fig. 1/1.
Removing:
The activated carbon filter is removed in
reverse sequence.
Replacing the activated carbon filter:
❑
During normal operation (daily 1 to 2
hours) the activated carbon filter must be
replaced approximately 1 x year.
❑
The activated carbon filter can be
purchased FROM YOUR DEALER.
❑
Use only original filters.
These ensure optimum function.
Disposal of the old activated carbon
filter:
❑
Activated carbon filters do not contain
any harmful substances. They can be
disposed of as residual waste.
Filters and maintenance
56080 Int 10-01-2003 11:00 Pagina 4