Siemens LU13 series, Installation And Operating Instructions Manual

Page: 7 / 20

5
Cleaning and care
Isolate the extractor hood by pulling out
the mains plug or switching off the fuse.
❑
When cleaning the grease filters, remove
grease deposits from the accessible side
of the housing.
This will prevent a fire hazard and will
ensure optimum function.
❑
Clean the extractor hood with a hot
soapy solution or with a mild window
cleaning agent.
❑
Do not scratch off dried-on dirt, but wipe
off with a moist cloth.
❑
Do not use any abrasive cleaning agents
or scouring sponges.
❑
Note: Do not apply alcohol (spirit) to pla-
stic surfaces, as they may tarnish.
Caution! Provide adequate ventilation in
the kitchen. No naked flames.
Clean the switch only with a soft, moist
cloth (mild soapy solution).
Do not clean the switch with a stainless-
steel cleaning agent.
Stainless-steel surfaces:
❑
Use a mild, non-abrasive stainless-steel
cleaning agent.
❑
Clean only in the direction of the ground
surface.
Do not clean stainless-steel surfaces
with scouring sponges or with cleaning
agents containing sand, soda, acid or
chlorides!
Replacing the lamps
1. Switch off the extractor hood and isolate
the extractor hood by pulling out the
mains plug or switching off the fuse.
2. Remove the grease filter
(see Filters and maintenance).
3. Replace the lamp (commercially
available candle lamps, max. 40 watts,
E14 lampholder). Fig. 4.
4. Reconnect the power by inserting the
mains plug or by switching on the fuse.
Malfunctions
Please contact customer service regarding
any queries or malfunctions.
When calling, please quote:
E-No. FD
Enter the numbers in the above box. The
numbers can be found on the rating plate –
remove the grease filter inside the extractor
hood to reveal the rating plate.
56080 Int 10-01-2003 11:00 Pagina 5