Siemens Logo! CM EIB, Manual

Page: 9 / 46

CM EIB
Manual, 03/2010, J31069-D1262-U002-A4-7618
9
Description
1
1.1 What is the CM EIB?
CM EIB is a communication module (CM) for connecting LOGO! to EIB/KNX.
The LOGO! communication module was implemented as slave module for the LOGO!
control module (12/24 or 115/240 V).
The module permits communication between the LOGO! master and external EIB devices
via the EIB.
The CM is an EIB bus node and enables LOGO! communication with other EIB devices by
exchanging EIB message frames.
What can the CM EIB do?
The CM transfers EIB message frames to LOGO! and LOGO! functions to the EIB.
The CM makes the current state of the configured EIB nodes available to LOGO!, which is
then able to link them to each other using their logical functions and timers. The EIB
message frames can also be connected to the message frames of the local LOGO! inputs
and outputs. The CM then transmits any status changes of the output signals to the EIB.
The CM makes the complete LOGO! process image available on the EIB. All LOGO! values
can then be linked with other EIB data points (or other LOGO!) on the EIB. Some LOGO!
data can also be used in modified form on the EIB, such as to implement dimmer or
shutter/blind controllers.
The combination of LOGO! and CM EIB provides the user with a distributed controller
functionality for the EIB with the ability to set or change parameters or links quickly, easily,
and without the need for a programming device.