Siemens Logo! CM EIB, Manual

Page: 32 / 46

Functions
7.4 EIB communication
CM EIB
32
Manual, 03/2010, J31069-D1262-U002-A4-7618
The dimming speed is set as a parameter in the EIB configuration.
VWHSFRGH
RU6WHSEUHDN;
LQFUHDVLQJKHOOHU
GHFUHDVLQJGXQNOHU
; ; ; ;
Figure 7-5 EIB dimming control
If 2 outputs are parameterized as shutter/blind controllers (0/1 suppression and edge
evaluation), one output each is parameterized as 0 suppression (only falling edges are sent
as 0 on the EIB) and one output is parameterized as 1 suppression (only rising edges are
sent as 1 on the EIB).
Using this function, several message frames can be sent sequentially on the EIB with a 1 (or
0).
The outputs Q13/14 and Q15/16 (if not available in the LOGO! hardware) can be configured
as multiplexers for the analog outputs.
To do this, the inputs of the analog multiplexer must be linked in parallel to the outputs in the
LOGO! application.