Siemens LOGO! CIM Operating Manual Download Page 3

Page: 3 / 91

LOGO! CIM
Operating Manual, 10/2021, A5E51250518-AA

Preface

Purpose of the documentation

This manual describes LOGO! communication interface module (CIM).
This manual supports you during the configuration, installation and operation of the

communication modules.

Product names and abbreviations

•

CIM or device
In this document, the term "CIM" or "device" is also used instead of the full product name

"LOGO! CIM“. CIM is the abbreviation for Communication Interface Module.

Use of the device

Please observe notes marked as follows:

Note

A note contains important information on the product described in the documentation, on

the handling of the product or on the section of the documentation to which particular

attention should be paid.

Note

To prevent injury, read the manual before use.

The manual is delivered online, you can download the document from Central technical

support (

https://support.industry.siemens.com/cs/ww/en/

History

Edition

Comment

09/2021

First Edition

Summary of Contents for LOGO! CIM




























































































Search results

Summary of Contents for LOGO! CIM

Reviews:

Related manuals for LOGO! CIM

Brands by name

Popular brands

Siemens LOGO! CIM, Operating Manual

Search results

Summary of Contents for LOGO! CIM

Reviews:

Related manuals for LOGO! CIM

Brands by name

Popular brands