Siemens LOGO! CIM Operating Manual Download Page 18

Page: 18 / 91

Structure of the device

2.3 The "RESET" button

LOGO! CIM

Operating Manual, 10/2021, A5E51250518-AA

2.3

The "RESET" button

The RESET button allows you to recovery the module to a factory default setting.

Operator input

Function

Keep pressing for longer than 10 seconds

Recovery the module to a default status

2.4

Slots for SIM card and cellular module

Both slots are behind the top housing.

Slot for the SIM card

Compatible cards

Mini SIM card, 25 x 15 mm (ISO/IEC 7810 ID-000)
Inserting the SIM card is described in the section Insert the SIM card (Page 34).

Slot for the cellular module

Compatible cellular modules:

GSM/GPRS

UTMS

LTE

Telit LE910C1-EU LTE CAT-1 mPCIe

Telit LE910C1-AP LTE CAT-1 mPCIe

Telit LE910C1-NF LTE CAT-1 mPCIe

SIM7600G-H LTE CAT-4 mPCIe

*SIM7600G-H LTE CAT-4 mPCIe is not certified to be used in hazardous locations.

Card errors / diagnostics

Card errors are indicated by the "mPCIe" LED.

Inserting the card

Inserting the SIM card is described in the section Installing the Cellular module (Page 36).

Summary of Contents for LOGO! CIM




























































































Search results

Summary of Contents for LOGO! CIM

Reviews:

Related manuals for LOGO! CIM

Brands by name

Popular brands

Siemens LOGO! CIM, Operating Manual

Search results

Summary of Contents for LOGO! CIM

Reviews:

Related manuals for LOGO! CIM

Brands by name

Popular brands