Siemens INOX PRO SIMATIC IPC277D Operating Instructions Manual Download Page 145

Page: 145 / 182

Technical specifications

9.6 BIOS description

SIMATIC IPC277D
Operating Instructions, 12/2016, A5E03409486-AE

145

9.6.3.6

Boot menu

In this menu this booting behavior of the device is specified and the boot medium or

sequence of the boot media is determined.

Entries in the boot menu

Entry

Meaning

Quick Boot

Enable or disable
If enabled, the device starts faster because various hardware function

tests are skipped.

Quiet Boot

If disabled, the device boots in text mode. If enabled, a splash screen with

logo is output.

Boot delay

Delays the boot sequence by n seconds.

POST errors

Specification of the boot reaction when faults are detected.

•

Never halt on errors: Continue the booting process when errors occur.

•

Halt on all errors: Interrupt the booting process when errors occur.

•

All without keyboard: Interrupt the booting process when errors occur,

except for keyboard errors.

•

All without kb/smart: Interrupt the booting process when errors occur,

except for keyboard and S.M.A.R.T errors. (SMART: Self-Monitoring,

Analysis and Reporting Technology)

Numlock

On = Enable numeric keypad on right
Off = Disable numeric keypad on right (= navigation)

USB Boot

Allow/Do not allow booting of inserted USB devices.

PXE Boot to LAN 2

Enable or disable booting of the LAN2 via PXE.

Summary of Contents for INOX PRO SIMATIC IPC277D























































































































































































Search results

Summary of Contents for INOX PRO SIMATIC IPC277D

Reviews:

Related manuals for INOX PRO SIMATIC IPC277D

Brands by name

Popular brands

Siemens INOX PRO SIMATIC IPC277D, Operating Instructions Manual

Search results

Summary of Contents for INOX PRO SIMATIC IPC277D

Reviews:

Related manuals for INOX PRO SIMATIC IPC277D

Brands by name

Popular brands