Siemens INOX PRO SIMATIC IPC277D Operating Instructions Manual Download Page 152

Page: 152 / 182

Technical specifications

9.6 BIOS description

SIMATIC IPC277D

152

Operating Instructions, 12/2016, A5E03409486-AE

9.6.3.8

Exit menu

You always exit BIOS Setup in this menu.

Settings in the Exit menu

Exit Saving Changes

All changes are saved and the system is restarted with the new

parameters.

Exit Discarding Changes

All changes are discarded and the system is restarted with the old

parameters.

Save Changes

All changes are saved.

Discard Changes

All changes are discarded.

Current profile

Standard

The BIOS settings are saved in the Flash

memory.

User

The BIOS settings are retained with <F9> "load

defaults".

Manufacturer This setting is only used for production purposes.

Do not use.

Load <Stand-

ard|User|Manufacturer> profile

Loads the values of the respective profile.

Save user profile

Saves the user profile values.

Summary of Contents for INOX PRO SIMATIC IPC277D























































































































































































Search results

Summary of Contents for INOX PRO SIMATIC IPC277D

Reviews:

Siemens INOX PRO SIMATIC IPC277D, Operating Instructions Manual, Page: 152 / 182

Search results

Summary of Contents for INOX PRO SIMATIC IPC277D

Reviews: