Siemens INOX PRO SIMATIC IPC277D Operating Instructions Manual Download

Page: 101 / 182

Device maintenance and repairs

8.4 Installing the software

SIMATIC IPC277D
Operating Instructions, 12/2016, A5E03409486-AE

101

Changing the settings for language, region and formats of the system account and the

standard user account
You can change the settings for language, region and formats of the system account (for

example, the language in the user login dialog) and the settings of the standard user account

(standard setting for new users). The settings of the registered user are copied to the system

account and the standard user account for this purpose.
1.

Choose:
"Start > Control Panel > Clock, Language, and Region > Regional and Language

Options"

You can make the required changes in the "Administrative" tab. You copy the settings by

clicking the respective button.

Installing new language packages
Some language packages are available on the Recovery DVD in the "Languagepacks"

folder.
1.

Choose:
"Start > Control Panel > Clock, Language, and Region > Regional and Language

Options"

Select the "Keyboards and Languages" tab.

Click the "Install/uninstall languages" button and make the required changes.

Summary of Contents for INOX PRO SIMATIC IPC277D























































































































































































Search results

Summary of Contents for INOX PRO SIMATIC IPC277D

Reviews:

Related manuals for INOX PRO SIMATIC IPC277D

Brands by name

Popular brands

Siemens INOX PRO SIMATIC IPC277D, Operating Instructions Manual

Search results

Summary of Contents for INOX PRO SIMATIC IPC277D

Reviews:

Related manuals for INOX PRO SIMATIC IPC277D

Brands by name

Popular brands