Installing and connecting the device
3.2 Installing the device
SIMATIC IPC277D
40
Operating Instructions, 12/2016, A5E03409486-AE
Requirement
●
All packaging components and protective foils should be removed from the HMI device.
●
To install the HMI device, you need the mounting clamps from the accessory kit.
Procedure
Insert the HMI device into the
mounting cutout from the front.
Insert a mounting clamp into the
cutout provided on the HMI de-
vice.
Tighten the mounting clamp with
the threaded pin. The threaded
pins of the mounting clamps have
a maximum tightening torque of
0.5 Nm on the 7, 9, and 12 inch
variants.
Repeat steps 2 and 3 for all
mounting clamps.
Check the fit of the mounting seal.
Result
The HMI device is mounted and the relevant degree of protection is ensured at the front.
Summary of Contents for INOX PRO SIMATIC IPC277D
Page 6: ...Preface SIMATIC IPC277D 6 Operating Instructions 12 2016 A5E03409486 AE ...
Page 22: ...Overview 1 3 Accessories SIMATIC IPC277D 22 Operating Instructions 12 2016 A5E03409486 AE ...
Page 170: ...List of abbreviations SIMATIC IPC277D 170 Operating Instructions 12 2016 A5E03409486 AE ...
Page 182: ...Index SIMATIC IPC277D 182 Operating Instructions 12 2016 A5E03409486 AE WinMove 76 ...