Installing and connecting the device
3.2 Installing the built-in unit
Industrial Flat Panel IFP1500, IFP1900, IFP2200, IFP1900 PRO, IFP2200 PRO, IFP1900 ETH, IFP2200 ETH
Operating Instructions, 07/2016, A5E31298376-AF
41
●
Ensure that the protective contact socket of the building installation is easily accessible
and that there is a mains disconnect switch in switchgear cabinet installations.
●
Position the device so that it is not exposed to direct sunlight.
●
Position the device so that it is easily accessible for the operator.
●
Choose a suitable installation height.
●
Ensure that the air vents of the device are not covered as a result of installation. Note the
permitted mounting positions.
3.2.2
Mounting clips or mounting brackets, position for IP65
Types of mounting clips and mounting brackets
You can mount the device as follows:
●
Device with 15", 19" or 22" display:
with 12 steel mounting clips (included in the product package and available as
accessories)
●
Device with 15", 19" or 22" display:
With 6 mounting brackets (available as accessories)
See also section "Accessories (Page 23)".
