PowerManager function
en
23
18.2 Checking the result
In the following table, you can check the result for the
quality and speed of the cooking process:
Result
The cookware is not suitable for the
cooking zone and therefore does not
heat up.
1
1
If a smaller cooking zone is available, test the cook-
ware on this cooking zone.
Result
The cookware is taking longer to heat
up than expected and cooking is not
progressing as well as it ought to.
1
The cookware is heating up correctly
and cooking is progressing well.
1
If a smaller cooking zone is available, test the cook-
ware on this cooking zone.
To activate this function, touch the settings range.
19 PowerManager function
You can use the PowerManager function to configure
the total power of the hob.
The hob settings are preconfigured at the factory. You
can use this function to configure the settings in ac-
cordance with the requirements of an electrical installa-
tion.
In order to not exceed this set value, the hob automat-
ically distributes the available power as needed
between the cooking zones that are switched on.
While the PowerManager function is activated, the out-
put of a cooking zone may temporarily fall below the
nominal value. In order to not exceed this set value, the
hob automatically distributes the available power as
needed between the cooking zones that are switched
on . The appliance regulates and selects the highest
power level automatically.
If the automatic power limitation is activated, the appli-
ance self-regulates but continues to display the selec-
ted power level unchanged.
For more information, go to .
20 Basic operation
20.1 Switching on the appliance
▶
Turn the function selector to any position other than
the "Off" position .
a
The appliance is switched on.
20.2 Switching off the appliance
▶
Turn the function selector to the "Off" position .
a
The appliance is switched off.
20.3 Types of heating and temperature
1.
Use the function selector to set the type of heating.
2.
Use the temperature selector to set the temperature
or grill setting.
a
The appliance starts heating after a few seconds.
a
Depending on the appliance type, rapid heating
automatically switches off at set temperatures of
200 °C and above and with certain types of heat-
ing.
3.
When the dish is ready, switch off the appliance.
Tips
¡
The most suitable type of heating for your food can
be found in the description of the types of heating.
¡
You can also set a cooking time and an end time
on the appliance.
"Time-setting options", Page 24
Changing the type of heating
You can change the type of heating at any time.
▶
Use the function selector to set the required type of
heating.
Changing the temperature
You can change the temperature at any time.
▶
Turn the temperature selector to set the desired
temperature.
21 Rapid heating
To save time, rapid heating can shorten the preheating
time for set temperatures over 100 °C.
You can use rapid heating for the following types of
heating:
¡
3D hot air
¡
Top/bottom heating
21.1 Setting rapid heating
To ensure an even cooking result, do not place the
food in the cooking compartment until rapid heating
has come to an end.
Note:
Do not set a cooking time until rapid heating has
come to an end.
