en
Before using for the first time
16
Accessories vary from one appliance to another. When
purchasing accessories, always quote the exact
product number (E no.) of your appliance.
You can find out which accessories are available for
your appliance in our online shop or from our after-
sales service.
8 Before using for the first time
Configure the settings for initial start-up. Clean the ap-
pliance and accessories.
8.1 Initial configuration
You have to implement settings for the initial configura-
tion before you can use your appliance.
Setting the time
Once the appliance has been connected to the mains
or after a power cut, the time flashes in the display. The
time starts at "12:00". Set the current time.
Requirement:
The function selector must be set to the
off position.
1.
Use or to set the time.
2.
Press .
a
The time that is set appears in the display.
Tip:
You can define whether the time is shown in the
display in the basic settings →
8.2 Cleaning the appliance before using it
for the first time
Clean the cooking compartment and accessories be-
fore using the appliance to prepare food for the first
time.
1.
Remove the accessory and the leftover packaging,
such as polystyrene pellets, from the cooking com-
partment.
2.
Before heating, wipe the smooth surfaces in the
cooking compartment with a soft, damp cloth.
3.
Ventilate the room while the appliance is heating.
4.
Set the type of heating and the temperature.
Type of heat-
ing
3D hot air
Temperature
Maximum
Cooking time 1 hour
5.
Switch off the appliance after the specified cooking
time.
6.
Wait until the cooking compartment has cooled
down.
7.
Clean the smooth surfaces with soapy water and a
dish cloth.
8.
Clean the accessory with soapy water and a dish
cloth or a soft brush.
9 Operating the hotplate
You can find out everything you need to know about
operating your hotplate here.
9.1 Switching the hob on and off
Switch the hob on and off using the main switch .
If you switch the appliance back on again within
four seconds after switching off, the hob starts up with
the previously stored settings.
Switching on the hob
▶
Touch .
An audible signal sounds and the display beside
it lights up.
a
The hob is ready for use.
Switching off the hob
▶
Touch until the displays go out.
The residual heat indicator lights up until the cook-
ing zones have cooled down sufficiently.
a
All cooking zones are switched off.
Note:
The hob switches off if all cooking zones have
been switched off for more than 20 seconds.
9.2 Setting the cooking zones
Select the required power level in the settings range.
Performance level
Lowest performance level
Highest performance level
Each power level has an intermediate level. This is
marked with a dot.
Notes
¡
In order to protect the appliance's electronic parts
from overheating or surge currents, the hob may
temporarily reduce the power level.
¡
In order to prevent the appliance from producing ex-
cess noise, the hob may temporarily reduce the
power level.
Selecting the cooking zone and power level
1.
Touch to select the cooking zone.
a
The display lights up and the symbol lights up
underneath it.
