Siemens HiPath 3000 V3.0 or later Gigaset M1 Professional Page 75 Operating Instructions Manual Download

Page: 75 / 236

Testing the Telephone

Step by Step

Testing the Telephone

Testing the Telephone Functions

You can test your telephone functions.

Precondition:

Your telephone is idle.

Press the key. The LED lights up.

Select and confirm.

qmhd

Enter the code.

If everything is OK,
•

all LEDs on the telephone start flashing, including
the ones on the key module (only the Program/Ser-
vice menu LED lights up);

•

your station number appears on the screen;

•

all pixels in the display are activated;

•

the ringer signal sounds.

Checking the Key Assignments

You can check the assignment of keys on your tele-
phone to see which functions are programmed on
which keys.

Press the key. The LED lights up.

Select and confirm.

qme

Enter the code.

Press the key. The key assignment appears on the
screen.

Select and confirm.

Program/Service

940=Phone test?

Program/Service

91=Prog. feature key?

Program another key?

End?

Summary of Contents for HiPath 3000 V3.0 or later Gigaset M1 Professional













































































































































































































































Search results

Summary of Contents for HiPath 3000 V3.0 or later Gigaset M1 Professional

Reviews:

Related manuals for HiPath 3000 V3.0 or later Gigaset M1 Professional

Brands by name

Popular brands

Siemens HiPath 3000 V3.0 or later Gigaset M1 Professional, Operating Instructions Manual

Search results

Summary of Contents for HiPath 3000 V3.0 or later Gigaset M1 Professional

Reviews:

Related manuals for HiPath 3000 V3.0 or later Gigaset M1 Professional

Brands by name

Popular brands