Siemens HiPath 3000 V3.0 or later Gigaset M1 Professional Operating Instructions Manual Download Page 42

Page: 42 / 236

Step by Step

Calling Multiple Parties Simultaneously

Checking which Parties are in the Confer-
ence (Initiator Only)

Select and confirm.
The stations appear on the screen.

Close the list: Select and confirm.

Removing Parties from the Conference (Initi-
ator Only)

Select and confirm.
The stations appear on the screen.

Press the keys shown to select the required station.

Select and confirm.

Leaving a Conference

Replace the handset.

Select and confirm.

Ending a Conference (Initiator Only)

Select and confirm.

Press the key. The LED lights up. Enter the code. The
LED goes out.

Removing the ISDN Central Office Party
From the Conference (Only for U.S., Not in
HiPath 500)

Select and confirm.

qhme

Press the key. The LED lights up. Enter the code. The
LED goes out.

View conf parties?

Exit list?

View conf parties?

For information on operation without an external
keyboard, see

page 213.

Remove party?

Withdraw?

End conference?

Program/Service

Drop last conf. party?

Program/Service

Summary of Contents for HiPath 3000 V3.0 or later Gigaset M1 Professional













































































































































































































































Search results

Summary of Contents for HiPath 3000 V3.0 or later Gigaset M1 Professional

Reviews:

Related manuals for HiPath 3000 V3.0 or later Gigaset M1 Professional

Brands by name

Popular brands

Siemens HiPath 3000 V3.0 or later Gigaset M1 Professional, Operating Instructions Manual

Search results

Summary of Contents for HiPath 3000 V3.0 or later Gigaset M1 Professional

Reviews:

Related manuals for HiPath 3000 V3.0 or later Gigaset M1 Professional

Brands by name

Popular brands