Siemens Healthineers ADVIA Quick Reference Manual Download Page 24 | Manualshive

Page: 24 / 24

Siemens Healthineers ADVIA Quick Reference Manual Download Page 24

© 2021 Siemens Healthcare Diagnostics Inc. All rights reserved.

This quick reference guide, and the software described within, are copyrighted.
No part of this may be copied, reproduced, translated, or reduced to any elec-
tronic medium or machine-readable form without the prior written consent of
Siemens Healthcare Diagnostics.

ADVIA® and associated marks are property of SIEMENS Healthcare Diagnostics.
All other trademarks are the property of their respective owners.

T02004.012 | Effective date 12/06/2021

Note: This document is for supplemental
use only and is not intended to be used in
place of primary technical materials.

Global Siemens Headquarters
Siemens AG
Wittelsbacherplatz 2
80333 Muenchen
Germany

Global Siemens Healthcare
Headquarters
Siemens AG
Healthcare Sector
Henkestrasse 127
91052 Erlangen
Germany

Global Division
Siemens Healthcare Diagnostics Inc.
511 Benedict Avenue
Tarrytown, NY 10591-5005
USA
www.siemens.com/diagnostics

«
...
22
23
24

Summary of Contents for Healthineers ADVIA

























Reviews:

No comments