86
Updating the base firmware
Gigaset SL910/910A / GBR/IRL / A31008-M2300-L101-1-7619 / appendix.fm / 08.12.2011
V
e
rsion 4.1, 21
.11.2007
Starting a firmware update
Prerequisite:
The base is connected to the Internet and is in idle status.
Starting the firmware update manually
¤
In the
Settings
menu (
¢
page 25), touch
[
Ê
System]
.
¤
Scroll to
Firmware Update
.
¤
Touch the corresponding
’
.
¤
Touch
Update
Firmware
.
¤
Enter the system PIN and confirm with
è
.
If a new version of the base firmware is available, message
New firmware available
- Update?
is displayed.
¤
Press
Yes
to confirm.
Setting the automatic firmware update
¤
In the
Settings
menu (
¢
page 25), touch
[
Ê
System]
.
¤
Scroll to
Firmware Update
.
¤
Activate/deactivate the function with the button
next to
Automatic Check
.
If the function is activated, the base will check daily whether a new firmware ver-
sion is available. If this is the case, you will receive the message
Start download?
.
¤
Press
Yes
to confirm.
If you answer the prompt with
No
, the message will not be displayed again until the
next firmware version is available. You can perform the firmware update manually
(
¢
page 86).
Please note
u
The firmware update can take up to six minutes, depending on the quality of
your DSL connection.
u
During the update, the registered handsets temporarily lose their connec-
tion to the base.
Please note
If the phone is not connected to the Internet at the time the check for new
firmware is carried out (e.g., no router connection), then the check will be car-
ried out as soon as the phone is reconnected to the Internet.