Siemens Gigaset SL910 User Manual Download

Page: 21 / 110

First steps

Gigaset SL910/910A / GBR/IRL / A31008-M2300-L101-1-7619 / starting.fm / 08.12.2011

rsion 4.1, 21

.11.2007

This brings up a list containing all the
available languages.

The current language is marked with

Touch the required language.

If your language is not displayed, the list
may be "longer" than the display. You
must then scroll through the list.

To do this, put a finger on the display
and move it slowly upwards.

The lower section of the list is then dis-
played and you can select a language.

Enter the country under

Country

in which

you will operate the phone and for which
it is authorised. If the setting is not com-
patible:

Touch the corresponding

’

icon.

A list of countries is displayed.

The current country is marked with

Touch your country. You may have to
scroll through the list as described pre-
viously. The

icon moves to this

country.

Touch the

‘

icon again to return to

the

Welcome

page.

Display Language

English

Français

Castellano

Nederlands

Italiano

Português

Dansk

Welcome

Country

United Kingdom

Area (Dial Code)

(Not configured)

‰

Country

United Kingdom

USA

Uruguay

Venezuela

Vietnam

Please note

If you have selected

Other Country

instead of a country, the

Welcome

page will

also show the

Country (Dial Code)

entry.

Touch the corresponding

’

icon and enter the

International Prefix

and

International Area Code

for the international country code, as described

below for the area code.

Proceed as described below.

Summary of Contents for Gigaset SL910















































































































Search results

Summary of Contents for Gigaset SL910

Reviews:

Related manuals for Gigaset SL910

Brands by name

Popular brands

Siemens Gigaset SL910, User Manual

Search results

Summary of Contents for Gigaset SL910

Reviews:

Related manuals for Gigaset SL910

Brands by name

Popular brands