68
Using multiple handsets
Gigaset SL910/910A / GBR/IRL / A31008-M2300-L101-1-7619 / Register-HS.fm / 08.12.2011
V
e
rsion 4.1, 21
.11.2007
Using multiple handsets
Registering handsets
You can register up to six handsets and Gigaset repeaters to your base. Your hand-
set can be registered on up to four bases.
Each registered device is assigned an internal number (1–6) and an internal name
(default names are
INT 1
–
INT 6
). You can change the names.
Registering the Gigaset SL910H handset to the Gigaset SL910/
SL910A base
You must initiate registration of the handset on the base (1) and on the handset (2).
Once registration is complete, the handset returns to idle status. If multiple hand-
sets are registered, the internal number of the handset is displayed in the display
status bar, e.g.
INT 1
. If not, repeat the procedure.
If six handsets are already registered to the base (all internal numbers are assigned),
the base automatically tries to de-register the last handset registered. If this
attempt is not successful, e.g., because this handset has a connection to the base,
the message
No free internal number
appears.
In this case, de-register another handset that is no longer required and repeat the
registration procedure.
1) On the base
¤
Press and
hold
the registration/paging key (
¢
page 8) on the base
(approx. 3 seconds).
2) On the handset
(
within 60 seconds)
u
The handset is not registered to a base.
¤
Touch
Register
.
Or:
u
The handset is already registered to a base.
¤
In the
Settings
menu (
¢
page 25), touch
[
É
Handsets and Base]
and
then
Register
.
If the handset is already registered to four bases:
¤
Touch the base where the registration should be overwritten, e.g.,
Base 2
.
The handset searches for a base that is ready for registration.
¤
If necessary, enter the system PIN for the base (max. 8 digits) and confirm
with
è
.
