Siemens Gigaset SL910 Page 68 User Manual Download

Page: 68 / 110

Setting an appointment (calendar)

Gigaset SL910/910A / GBR/IRL / A31008-M2300-L101-1-7619 / applications.fm / 08.12.2011

rsion 4.1, 21

.11.2007

Displaying missed appointments, anniversaries

Appointments/anniversaries (

page 49) are displayed in the

Reminders / Events

list if:

You do not accept an appointment/anniversary.

The appointment/anniversary was signalled during a phone call.

The handset was deactivated at the time of the appointment/anniversary.

You can open the

Reminders / Events

list via the message page in the idle display.

The following icon is displayed for the list.

Touch the icon to open the list.

Delete an entry:

Touch

[

Delete]

Touch the entry in the list.

Touch

[

Delete]

If 20 entries are saved in the list, the oldest entry is deleted at the time of the next
unacknowledged appointment reminder.

Setting a reminder call

In the

Settings

menu (

page 25), touch

[

Audio Settings]

Touch the

’

next to

Reminder Signal

Adjust the volume with

or activate the crescendo call with the button

next to

Crescendo

Touch the

’

next to

Sound

Select the ringtone.

Back with

‘

Number of new entries

Number of old entries

Please note

To delete the entire contents of the list, see page 44.

Summary of Contents for Gigaset SL910















































































































Search results

Summary of Contents for Gigaset SL910

Reviews:

Related manuals for Gigaset SL910

Brands by name

Popular brands

Siemens Gigaset SL910, User Manual

Search results

Summary of Contents for Gigaset SL910

Reviews:

Related manuals for Gigaset SL910

Brands by name

Popular brands