manualshive.com logo in svg

Siemens Gigaset SL910, User Manual

Share
Download
Siemens Gigaset SL910 User Manual Download Page 17

15

First steps

Gigaset SL910/910A / GBR/IRL / A31008-M2300-L101-1-7619 / starting.fm / 08.12.2011

V

e

rsion 4.1, 21

.11.2007

Setting up the handset for use

The handset's display and keys are covered with a protective film. 

Please remove 

the protective film!

Inserting the battery and closing the battery cover

To 

reopen the battery cover

 to replace the battery:

¤

Insert your fingernail into the 
cavity on the bottom of the 
battery cover and pull the bat-
tery cover upwards.

Warning

Please do 

not

 use any touchscreen styli to operate the handset! 

Do not use any protective sleeves/films from other manufacturers, as they may 
restrict the operation of your handset. 

Warning

Use only rechargeable batteries (

¢

page 92) recommended by Gigaset Com-

munications GmbH, as this could result in significant health risks and personal 
injury. For example, the outer casing of the battery could be destroyed or the 
battery could explode. The phone could also malfunction or be damaged as a 
result of using batteries that are not of the recommended type.

¤

First insert battery with the 
contact surface facing down

.

¤

Then press the battery down-
wards 

 until it clicks into 

place.

1

2

¤

First, align the protrusions on the 
side of the battery cover with the 
notches on the inside of the cas-
ing.

¤

Then press the cover until it clicks 
into place.

1

2

Summary of Contents for Gigaset SL910















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands