5.1.3 Repair of handset:
Do not touch the contacs when handling the following parts!!!
5.1.3.1 Display cover/ Display
ESD regulations have to be followed !
Needed material: pliers, small screw driver
Insert a small screw driver between both plastic parts of the cover and turn it
carefully (do not touch the LCD) in order to separate the parts.
Then pull the display display cover part as described in the picture below.
To replace the complete display open the connector carefully by lifting the brown jig
(see red arrow in picture above). Release the display foil and replace the display.
Insert the foil of the new display and close the brown jig.
