Handset settings
29
KAP10.FM5
18.7.99
Gigaset 2011 Tango: A30852-X1106-B307-2-7619
Ringer settings
You can set the ringer on your handset to suit your individ-
ual requirements.
(
t
means: browse using
x
,
confirm using
u
)
The options are changed the same way:
Activating/deactivating the call duration display
In the case of external calls (
➔
page 10), the call duration
display is started approximately 12 seconds after the last
digit is dialed. The display remains visible for about four
seconds after the call is finished. The call duration display
can be switched on and off.
(
t
means: browse using
x
,
confirm using
u
)
Z
OK
.t
Settings
t
Ringer Options
t
followed by:
Option
Description
Default value
Sets the handset’s ringer volume:
level 0 = off, level 6 = loud (7 levels)
6 (loud)
Sets the handset’s ringer tone –
10 levels are available
1
Ringer Volume
Ringer Tone
x
or
x
Change the option.
u
or
u
Store the setting or quit the function without implement-
ing any changes.
>
<
OK
{
If several handsets are being operated in one
room, it is easier to distinguish their ringers if
they are set to different tones.
Z
OK
.t
Service
Call up the "Service" menu item.
# 1
Start setting procedure.
o
Enter the four-digit system code (factory default "0000").
u
9 6
The current setting is shown on the handset display:
@ x
Switch off the call duration display.
or
1 x
Switch on the call duration display (factory default).
REDIAL
(Example: the call duration
display is on.)
RUF AUS
96 1
SET
REDIAL
SET
SET
SET
