manualshive.com logo in svg

Siemens FDUL221, Technical Manual, Page: 70 / 76

Share
Download
Siemens FDUL221 Technical Manual Download Page 70

7 

Maintenance / Repair 
Firmware update 

 

70 
Building Technologies 

 

008250_i_en_-- 

Fire Safety 

 

2013-08-15 

Firmware update by PC 

  Permanent and safe power supply to the FDUL221 line tester is available while 

the update is taking place. 

  The file required for the firmware update is available. You will find the file on 

the CD included in the set or on the Intranet in the Customer Support Center

1

. 

1.  Load the firmware update on the PC. 
2.  Connect the FDUL221 line tester to the PC. 
3.  Connect the FDUL221 line tester to the mains and switch it on. 
4.  On the PC, open the directory in which the firmware is located. 
5.  Select the required firmware version. 
6.  Start the download by double-clicking on the file *.exe'. 
7.  Follow the instructions indicated on the PC screen. 
8.  In the case of initial installation, select the available connection variant. 

9.  Follow the prompt to press the 

 buttons on the FDUL221 line tester. 

10. Hold the buttons down and follow the instructions. 

  The update has been successfully installed. 

11. Disconnect the FDUL221 line tester from the PC. 
12. Configure the FDUL221 line tester and save the configuration. [  50] 
13. Switch off the FDUL221 line tester. 

  The update is complete. 

1) 

obtain from: Customer Support Center/PSP Product Support Platform CSC 

address: https://intranet.sbt.siemens.com/fs/CSC/ 

Firmware update with FS20/Cerberus PRO FS720 fire detection 

system 

In the Sinteso FS20/Cerberus PRO FS720 fire detection system, the firmware 

update can also be performed with the FXS2007 engineering tool or with the 

FXS2008 periphery update tool. 
You will find detailed information about firmware updates for the FS20 fire detection 

system in document 009052 and for the FS720 fire detection system in document 

A6V10210416. 

See also 

  Operating the line tester with a PC [  56] 
  Applicable documents [  7] 

Summary of Contents for FDUL221













































































Reviews:

No comments