Siemens ECOFAST, Manual

Page: 36 / 77

Wiring and interfaces
ECOFAST Motor Starters
GWA 4NEB 950 0562-12
3-11
Deutsc
h
Eng
lish
Han Q8 power connectors
The power connectors belonging to a power tee connector and to the motor
starter consist of the following components:
Fig. 3-6: Han Q8 power connector
Assembling and wiring power connectors
Assemble and wire the power connectors according to the following instruc-
tions:
Table 3-4: Assembling and wiring power connectors
Step Procedure
1 Guide the cable through the heavy-gauge threaded joint, the matching
enclosed sealing ring in each case and the connector housing.
2 Attach the jacks / contact pins to the strands
3 Push the jacks / contact pins into the socket insert / pin insert until they
snap into place.
4 Pull the cable back and screw the insert in place in the connector housing
with the enclosed screws.
5 Screw the heavy-gauge threaded joint tight.
Connector housing Connector housing
Socket insert
Contact sockets
Contact pins
Pin insert
Han Q8 socket Han Q8 pin
for looping through the main power for connecting the main power